Rucoca

 
 
 

Prosthetic Components - Bar Components
Lock gold ucla
  • Abutment in gold alloy for UCLA technique.
  • Antirotational.
  • Available in 1 height (1 mm).
  • Indicated for single and multiple restorations.
  Diameter UCLA Castable
3,30 mm 330A BTIUOL 330 BTICSF
3,75 mm 375A BTIUOL 375 BTICSF
4,50 mm 450A BTIUOL 450 BTICSF
5,50 mm 550A BTIUOL 550 BTICSF
6,50 mm
not available
not available
 
 
Rotational gold ucla
  • Abutment in gold alloy for UCLA technique.
  • Rotational.
  • Available in 1 height (1 mm).
  • Indicated for multiple restorations.
  
  Diameter UCLA Castable
3,30 mm 330A BTIUOR 330 BTICSF
3,75 mm 375A BTIUOR 375 BTICSF
4,50 mm 450A BTIUOR 450 BTICSF
5,50 mm 550A BTIUOR 550 BTICSF
6,50 mm
not available
not available
       
 

 
Transmucosal neck
  • Transmucosal neck in titanium alloy.
  • Antirotational.
  • Available in three heights (1,7 - 2,7 - 3,7 mm) according to the gingival thickness.
  • Indicated in case of disparallelism and for high occlusal stress in single and multiple restorations.
  Diameter h. 1,7 mm h. 2,7 mm h. 3,7 mm
3,30 mm 330B BTIMTL 330C BTIMTL 330D BTIMTL
3,75 mm 375B BTIMTL 375C BTIMTL 375D BTIMTL
4,50 mm 450B BTIMTL 450C BTIMTL 450D BTIMTL
5,50 mm 550B BTIMTL 550C BTIMTL 550D BTIMTL
6,50 mm 650B BTIMTL 650C BTIMTL 650D BTIMTL
 
 
 
Castable for transmucosal neck
  • Plexyglass castable to be used with transmucosal neck.
  Diameter Code
3,30 mm 330 BTICTX
3,75 mm 375 BTICTX
4,50 mm 450 BTICTX
5,50 mm 550 BTICTX
6,50 mm 650 BTICTX
 
 
 
Transmucosal through screw
  • Through screw in titanium alloy.
  • Available in 3 different heights according to the transmucosal neck height.
  • To be screwed at 25 Ncm.
Length Code
1,7 mm 170 BTIVPT
2,7 mm 270 BTIVPT
3,7 mm 370 BTIVPT
 
 
 
Lock overmelting trasmucosal neck
  • Transmucosal neck in titanium alloy.
  • Antirotational.
  • Available in 2 heights (1,7 - 2,7 mm) according to
    the gingival thickness.
  • Indicated for disparallelism, in case of high occlusal
    stress and for single or multiple restorations.
  • Indicated for overmelting in titanium.
  Diameter h. 1,7 mm h. 2,7 mm Castable
3,30 mm 330B BTICTLS 330C BTICTLS 330 BTICSF
3,75 mm 375B BTICTLS 375C BTICTLS 375 BTICSF
4,50 mm 450B BTICTLS 450C BTICTLS 450 BTICSF
5,50 mm 550B BTICTLS 550C BTICTLS 550 BTICSF
6,50 mm 650B BTICTLS 650C BTICTLS 650 BTICSF
 
 
 
Rotational overmelting trasmucosal neck
  • Transmucosal neck in titanium alloy.
  • Rotational.
  • Available in 2 heights (1,7 - 2,7 mm) according to
    the gingival thickness.
  • Indicated for disparallelism, in case of high occlusal
    stress and for single or multiple restorations.
  • Indicated for overmelting in titanium.
  Diameter h. 1,7 mm h. 2,7 mm Castable
3,30 mm 330B BTICTRS 330C BTICTRS 330 BTICSF
3,75 mm 375B BTICTRS 375C BTICTRS 375 BTICSF
4,50 mm 450B BTICTRS 450C BTICTLS 450 BTICSF
5,50 mm 550B BTICTRS 550C BTICTRS 550 BTICSF
6,50 mm 650B BTICTRS 650C BTICTRS 650 BTICSF
 
 
 
Screwable lock and angled abutment
  • Lock neck in titanium alloy.
  • Available in 4 heights (1 - 2,5 - 4 - 5,50 mm) according to the gingival thickness.
  • Indicated for disparallelism, in case of high occlusal stress and in single restorations.
  • Indicated for bar-retained restorations and screwable technique.
  Diameter h. 1 mm h. 2,5 mm h.4 mm h. 5,5 mm
3,30 mm 330A BTIMP2 330A BTIMP2 330B BTIMP2 330B BTIMP2
3,75 mm 375A BTIMP2 375A BTIMP2 375B BTIMP2 375B BTIMP2
4,50 mm 450A BTIMP2 450A BTIMP2 450B BTIMP2 450B BTIMP2
5,50 mm 550A BTIMP2 550A BTIMP2 550B BTIMP2 550B BTIMP2
6,50 mm 650A BTIMP2 650A BTIMP2 650B BTIMP2 650B BTIMP2
 
  • Lock neck in titanium alloy.
  • Available in 2 in inclinations (15° - 25°) and 2 heights (1- 2,5 mm) according to the gingival thickness.
  • Indicated for disparallelism, in case of high occlusal stress and in single or multiple restorations.
  • Indicated for screwable technique.
  Diameter h. 1 mm - 15° h. 1 mm - 25° h.2,5 mm 15° h. 2,5 mm -25°
3,30 mm 330A BTIMI15 330A BTIMI25 330B BTIMI15 330B BTIMI25
3,75 mm 375A BTIMI15 375A BTIMI25 375B BTIMI15 375B BTIMI25
4,50 mm 450A BTIMI15 450A BTIMI25 450B BTIMI15 450B BTIMI25
5,50 mm 550A BTIMI15 550A BTIMI25 550B BTIMI15 550B BTIMI25
6,50 mm 650A BTIMI15 650A BTIMI25 650B BTIMI15 650B BTIMI25
 
 
  • Screwable closing-cap.
  Diameter Code
3,30 mm 330 BTICPMP2
3,75 mm 375 BTICPMP2
4,50 mm 450 BTICPMP2
5,50 mm 550 BTICPMP2
6,50 mm 650 BTICPMP2
 
  • Castable abutment with through screw.
  Diameter Code
3,30 mm 330 BTICMP2
3,75 mm 375 BTICMP2
4,50 mm 450 BTICMP2
5,50 mm 550 BTICMP2
6,50 mm 650 BTICMP2
 
  • Short through screw.
Code
BTIVPMP2
 
  • Long through screw.
  • Available in 4 lengths.
  • To be screwed with the screwdriver for screwable abutments (155 BTICV).
Abutment height Code
1 mm BTIVPMPA2
2,5 mm BTIVPMPB2
4 mm BTIVPMPC2
5,5 mm BTIVPMPD2
 
Transfer and analogue for passive abutment
 
  • Laboratory analogue made of titanium alloy to be used along with transfer for passive abutment.
  • Transfer for impression to be used only for passive abutment.
  • Short screw with cap or long screw included in the transfer package.
    • Please note: short screw or long screw for transfer are meant only for laboratory use. For impression, use the specific screw for passive abutment according to the abutment height.
  Diameter Analogue Transfer
3,30 mm 330 BTIANP1 330 BTITPMP1
3,75 mm 375 BTIANP1 375 BTITPMP1
4,50 mm 450 BTIANP1 450 BTITPMP1
5,50 mm 550 BTIANP1 550 BTITPMP1
6,50 mm 650 BTIANP1 650 BTITPMP1
 
Lock passive abutment
 
  • Passive abutment in titanium alloy.
  • Antirotational.
  • Available in 3 heights (0 - 1 - 2 mm) according to
    the gingival thickness.
  • Suitable for single restorations and bar retained solutions in the anterior and posterior areas.
  Diameter h. 0 mm h. 1 mm h. 2 mm
3,30 mm 330A BTIMP1 330B BTIMP1 330C BTIMP1
3,75 mm 375A BTIMP1 375B BTIMP1 375C BTIMP1
4,50 mm 450A BTIMP1 450B BTIMP1 450C BTIMP1
5,50 mm 550A BTIMP1 550B BTIMP1 550C BTIMP1
6,50 mm 650A BTIMP1 650B BTIMP1 650C BTIMP1
 
Rotational passive abutment
 
  • Passive abutment in titanium alloy.
  • Rotational.
  • Available in 3 heights (0 - 1 - 2 mm) according to the
    gingival thickness.
  • Suitable for single restorations and bar retained solutions in the anterior and posterior areas.
  Diameter h. 0 mm h. 1 mm h. 2 mm
3,30 mm 330A BTIMPR1 330B BTIMPR1 330C BTIMPR1
3,75 mm 375A BTIMPR1 375B BTIMPR1 375C BTIMPR1
4,50 mm 450A BTIMPR1 450B BTIMPR1 450C BTIMPR1
5,50 mm 550A BTIMPR1 550B BTIMPR1 550C BTIMPR1
6,50 mm 650A BTIMPR1 650B BTIMPR1 650C BTIMPR1
 
  • Castable for lock and rotational passive abutment.
  Diameter Code
3,30 mm 330 BTICMP1
3,75 mm 375 BTICMP1
4,50 mm 450 BTICMP1
5,50 mm 550 BTICMP1
6,50 mm 650 BTICMP1
 
 
  • Short through screw.
  • Available in 3 heights according to the abutment height.
Abutment height Code
0 mm BTIVPMPA1
1 mm BTIVPMPB1
2 mm BTIVPMPC1
 

 

copyright© 2008 Rucoca inc.
maintained by Mr. E, 2009